This was to have the flash as the main and the out side light two stop under. the out side light was f5.6- 1/60 the flash was f5.6 1/60
So the shutter will control the out side light. So to get a two stop difference the shutter speed needs to be 2 stops under. The shot was f5.6-1/15.
You need to be careful that having a slow shutter speed the your subject doesn't move. Also that you don't get light from the modeling light in the shot ( turning it off is a good idea.)
This was balancing the out side ligth with the flash. Out side light was f5.6-1/60 so the flash is also f5.6-1/60
This shoot was this flash as main and sun light as the fill. Flash was f4-1/60 sun light was f1.8-1/60
We turned on the lights in the room and this help the light in the room.
Note tungsten light will give a reddish glow to the image. All so be careful with bounce when using the flash.
this is using the the mono block as the main light in the board room. The flash was 1/60-f5.6 shot at a 85mm lens this is so that the perspective is that of what you see in the world. No funny shapes with the heads.
This was using the Flash as main light flash was at f22. the sun light was at f22-1/60s so we needed to make the sun light 2 stop lighter so using the shutter speed on the camera this controls the day exposure so the exposure was f22 -1/15s
This Shot was shot with the sun as the main light at f11/60s with the flash as two stops under.f32
No comments:
Post a Comment